A gamepad should make gaming easier, not a task of resolving connection problems. Unfortunately, wireless controllers can sometimes refuse to connect, lose connection, or stop responding when they should be on. Knowing the possible culprits will assist in fixing a faulty connection without spending hours attempting all possible options.
Most of the issues of controller losing connection HSSGamepad users encounter are caused by a low battery, outdated Bluetooth pairings, minor controller issues, or USB troubles. Luckily, there is a list of steps that can be taken to fix connectivity problems.
Causes of Losing Connection with HSSGamepad
Before attempting to fix advanced issues, it is best to narrow the possible reasons why a controller stopped working.
Low Battery or Power Supply
A gamepad with a low battery might power on but fail to transmit data due to a weak connection. If a controller was not used for a long time, it is also possible that its battery ran out.
To fix this potential reason for a connectivity issue, it is critical to charge HSSGamepad to full capacity. The next step should resolve power supply problems.
Old Bluetooth Pairings
Sometimes, a phone, tablet, PC, or console will attempt to reconnect to a Bluetooth device that was paired previously. If a different device was used, it might interfere with an existing connection.
One of the issues of controller losing connection HSSGamepad users may encounter is pairing problems. It is best to disable Bluetooth connections on devices that were not used to pair a controller to stop interference.
Temporary Controller Issues
Any electronics may experience a minor fault from time to time. A gamepad has Bluetooth, so it is possible to encounter a minor pairing glitch. To resolve this first-time pairing issue, it is best to attempt a hard reset.
Simple Fixes for Losing Connection Issues with HSSGamepad
Before trying advanced connectivity issue solutions, it is best to attempt the simplest ones.
- Charge the Gamepad
Connect HSSGamepad to a reliable power source and wait until it is fully charged. It is a good idea to avoid using the battery indicator as a reference for sufficient battery power. Once the controller is fully charged, disconnect it from a power source and attempt to pair it again. - Hard Reset
If the first method did not produce any results, it is time to try a hard reset. Simply hold the sync button on the controller for 10 seconds to place it in a factory state. After the hard reset, wait for a moment before trying to pair it again. - Delete Old Pairings
Go to the Bluetooth settings of a PC, phone, tablet, or console and delete old pairings. Additionally, disable Bluetooth connections on various gadgets that might have been used previously to pair with a controller. Once old connections are deleted, put HSSGamepad in pairing mode and connect it to a primary device again. - Re-Pair the Controller
After old pairings are deleted, it is time to re-pair the controller with an existing device. When possible, keep the controller close to a device that will be used for gaming and avoid Bluetooth interference. This step assists in resolving most issues of controller losing connection HSSGamepad users usually experience after switching between multiple devices.
Fixing USB Related Problems
Sometimes, a wireless connection is not the reason why a controller malfunctions. If a user opts to connect a gamepad with a USB cable, it is essential to examine the setup.
First of all, it is critical to use a USB “data cable” that can transmit data from a controller to a computer. Some USB cables only charge devices but cannot send data to them, so a PC will not recognize such a cable. It is best to connect a gamepad directly to a computer rather than a USB hub. Ideally, connect a controller to the back of a desktop PC as ports on the back are usually more reliable as they are connected directly to a motherboard.
If the controller works on one USB port but not another, the issue is in the port or a USB cable rather than a gamepad.
Next Steps if Simple Fixes Do Not Work
If an HSSGamepad still fails to pair with a computer after charging, hard reset, deleting old pairings, and examining the USB cable, the next logical step is to look at a computer or a console. Simply restart an operating system and ensure that Bluetooth is enabled. It is also a good idea to test a gamepad with another device. If a controller works on a different device, the issue is in Bluetooth settings or USB ports of an existing device.
It is best to avoid multiple pairings and unpairing of a controller as it will cause old pairings and connection problems if several pairings are stored in devices that have Bluetooth.
Conclusion
The majority of issues of controller losing connection HSSGamepad users experience can be resolved with a few simple steps. First of all, it is essential to charge a gamepad to full capacity. After that, try a hard reset and delete old pairings. Then, put a controller in pairing mode and connect it to a device again.
When a controller is used with a USB cable, it is critical to ensure that a data cable is used and that it is connected to a suitable port. These simple steps will assist in resolving most connectivity issues hssgamepad and get back to playing games.
